DIY Furnace Repair – St. Louis Residents’ Rough Guide

Furnace Repair – The St. Louis Residents’ Rough Guide

When it comes to furnace repair, St. Louis’ residents don’t usually go the specialist route. To be a bit more specific, lots of them choose to engage in DIY endeavors. It should be pointed out though, that home-heating solutions aren’t among the easiest devices to troubleshoot. That’s why it’s necessary to learn as much as possible about the task at hand before doing it. So, just continue reading.

Gas-Based Heaters

Here are a few tips for homeowners who need to get their propane-fueled furnaces running:

• Fan Checks – when trying to fix a home-heating device, it’s important to check the fan. Why’s that? Well, it’s because fans that have stopped working are usually a sign of connection issues. Once those wiring problems have been resolved (by reattaching things, of course), the fans would also spin again.


• Cool Sides – after checking their furnaces thoroughly, some people end up realizing that the sides stay cool even if the pilot lights up as usual. Given that combination of “symptoms”, it’d be safe to assume that the problem stems from either one of these things – a broken thermostat, a non-functional control unit, or a defective valve.

The Electric Variant

While some would be interested in troubleshooting gas-powered heaters, there are those who face the need to tinker with electric heat-generating devices. Well, when trying to carry out electric-furnace repair, St. Louis’ residents just have to pay attention to fans (much like those attempting to fix gas-based heating solutions).

• The No-Spin Suspect – if the furnace’s cooling components aren’t continuously spinning (or have stopped entirely), then either the thermostat or the blower might have developed a problem.


• Spinning Possibilities – homeowners who’ve found out that their heating systems’ fans haven’t stopped working, should probably exert effort in finding burnt wires and bad sequencers.


• On the Temperatures – those who think that their heaters’ blowers are busted should see (to confirm) whether temperatures are rising past what’s expected. As for people trying to verify wire dilemmas, it’s crucial to find out whether temperatures aren’t increasing as much as they should.

Oil-Reliant Furnace

Now that gas and electric heating solutions have been discussed, it’s time to move on to the topic of oil-reliant furnaces. What are the most important things to check when trying to troubleshoot heaters that use oil? Here are the answers to that:

• On the Sound – when an oil-requiring device is started, it gives of a sound (or more specifically, a click) that signifies proper ignition. So, if ever that sound couldn’t be heard anymore, then it’s most likely time to replace the ignition transformer.


• A Sudden Stop – some defective home-heating solutions that make use of oil end up stopping before generating any heat. Well, that issue is often traced to either one of these three underlying concerns – insufficient fuel, congested filters, and plugged-in nozzles.

Calling the Experts

Pinpointing the possible causes of some problems isn’t difficult at all. Here’s something that DIY fixers though think about though – the challenge lies in isolating which part really needs replacement. So, those who don’t have the patience nor the skill to see which component has become defective should just call the professionals. Simply put, when trying to carry out DIY furnace repair, St. Louis’ residents should know that it’s okay to call a HVAC contractor. Vitt Heating & Air Conditioning Co Inc is a reliable 60 year old family owned business that specializes in furnace repair. Give us a call at 314-351-5580 today.

DIY Furnace Repair – St. Louis Residents’ Rough Guide